您的位置: 标准下载 » 国内标准 » 行业标准 »

GA 244-2000 人民警察警徽技术标准

时间:2024-05-11 04:41:32 来源: 标准资料网 作者:标准资料网 阅读:8416
下载地址: 点击此处下载
基本信息
标准名称:人民警察警徽技术标准
英文名称:The technical standard of The Peoples Police emblem
中标分类: 综合 >> 社会公共安全 >> 警用装备与器械
ICS分类: 环保、保健与安全 >> 犯罪行为防范
发布部门:中华人民共和国公安部
发布日期:2000-04-10
实施日期:2000-04-10
首发日期:
作废日期:
提出单位:中华人民共和国公安部政治部
归口单位:公安部警用械具警服标准化技术委员会
起草单位:总后军需生产技术研究所
起草人:高军、刘惠明
出版社:中国标准出版社
出版日期:2000-04-10
页数:8页
书号:155066.2-13146
适用范围

本标准规定了中华人民共和国人民警察警徽的技术要求、试验方法、检验规则、包装、标志、运艳及贮存。
本标准适用于以玻璃纤维增强塑料制作的、用于悬挂的警徽的生产和检验。其他应用方式或其他材质制作的警徽的生产和检验,亦须参照执行。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 综合 社会公共安全 警用装备与器械 环保 保健与安全 犯罪行为防范
Product Code:SAE J443
Title:Procedures for Using Standard Shot Peening Almen Strip
Issuing Committee:Surface Enhancement Committee
Scope:This SAE Recommended Practice provides uniform procedures for using the standard shot peening test strips reported in SAE J442. Standard test strips are used to establish saturation, determine intensity, monitor repeatability of the shot peening machine operations, and can be used to predict a desired result on a part. It is recommended that the standard test strip A be used for intensities that produce arc heights of 0.10 mm A (0.004 inch A) to 0.60 mm A (0.024 inch A). For intensities below 0.10 mm A (0.004 inch A), the standard N strip is recommended, and for intensities above 0.60 mm A (0.024 inch A), the standard C strip is recommended.The process of shot peening, in common with many other processes, cannot at present be adequately controlled by nondestructive inspection of the peened parts, therefore, it is necessary to control the process itself to achieve consistent, reliable results.【英文标准名称】:Steelsforquenchingandtempering-Part1:generaltechnicaldeliveryconditions.
【原文标准名称】:淬火和回火钢.第1部分:一般交货技术条件
【标准号】:NFA35-552-1-2006
【标准状态】:现行
【国别】:法国
【发布日期】:2006-12-01
【实施或试行日期】:2006-12-05
【发布单位】:法国标准化协会(AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:
【中国标准分类号】:H40
【国际标准分类号】:77_140_10
【页数】:28P;A4
【正文语种】:其他